Abstract: | An attempt has been made in this study to screen some fish muscle enzymes to assess their potential worth in testing the degree of freshness of fish. A problem with routine enzyme activity determinations is the complexity of the method of enzyme assay. Hence, in the present study as far as possible simple assay techniques were adopted. Several species were screened to assess the possibility of employing this procedure on a large scale. It is hoped that findings of this study will lead to the development of meaningful criteria in testing the freshness of fish. This thesis has been divided into five chapters |
Description: | Division of Marine Biology, Microbiology and Biochemistry, School of Marine Sciences, Cochin University ofScience and Technology |
URI: | http://dyuthi.cusat.ac.in/purl/3590 |
Files | Size |
---|---|
Dyuthi-T1530.pdf | (4.119Mb) |
URI: | http://dyuthi.cusat.ac.in/purl/1220 |
Files | Size |
---|---|
Dhamodaran Namboodiri D 1988.PDF | (378.5Kb) |
Abstract: | A detailed study of the blends of ethylene-propylene-diene rubber (EPDM) and chlorobutyl rubber (CIIR) is proposed in this study. These blends may find application in the manufacture of curing diaphragms/curing envelopes for tire curing applications. EPDM possesses better physical properties such as high heat resistance, ozone resistance, cold and moisture resistance, high resistance to permanent defonnation, very good resistance to flex cracking and impact. Because of the low gas and moisture penneability, good weathering resistance and high thermal stability of CIIR, blends of EPDM with CIlR may be attractive, if sufficient mechanical strength can be developed. Although a lot of work has been done on elastomer blends, studies on the blends of EPDM and CIIR rubbers are meagre. Hence in this investigation it is proposed to make a systematic study on the characteristics of EPDM and CIIR rubber blends.The mechanical and physical properties of an elastomer blend depend mainly on the blend compatibility. So in the first part of the study, it is proposed to develop compatible blends of EPDM with CIIR. Various commercial grades of ethylenepropylene- diene rubber are proposed to be blended with a specific grade of chlorobutyl rubber at varying proportions. The extent of compatibility in these blends is proposed to be evaluated based on their mechanical properties such as tensile strength, tear strength and ageing resistance. In addition to the physical property measurements, blend compatibility is also proposed to be studied based on the glass transition behavlour of the blends in relation to the Tg's of the individual components using Differential Scanning Calorimetry (DSC) and Dynamic Mechanical Analysis (DMA). The phase morphology of the blends is also proposed to be investigated by Scanning Electron Microscopy (SEM) studies of the tensile fracture surfaces. In the case of incompatible blends, the effect of addition of chlorosulfonated polyethylene as a compatibiliser is also proposed to be investigated.In the second part of the study, the effect of sulphur curing and resin curing on the curing behaviour and the vulcanizate properties of EPDM/CIIR blends are planned to be evaluated. Since the properties of rubber vulcanizates are determined by their network structures, it is proposed to determine the network structure of the vulcanizates by chemical probes so as to correlate it with the mechanical properties.In the third part of the work, the effect of partial precuring of one of the components prior to blending as a possible means of improving the properties of the blend is proposed to be investigated. This procedure may also help to bring down the viscosity mismatch between the constituent e1astomers and provide covulcanization of the blend.The rheological characteristics and processability of the blends are proposed to be investigated in the last part of the study. To explore their possible applications, the air permeability of the blend samples at varying temperatures is proposed to be measured. The thermal diffusivity behaviour of EPDM/CIlR blends is also proposed to be investigated using novel laser technique. The thermal diffusivity of the blends along with the thermal degradation resistance may help to determine whether the blends are suitable for high temperature applications such as in the manufacturing of curing envelope. |
Description: | Deparhnent of Polymer Science and Rubber Technology, Cochin University of Science and Technology |
URI: | http://dyuthi.cusat.ac.in/purl/2524 |
Files | Size |
---|---|
Dyuthi-T0683.pdf | (6.799Mb) |
Abstract: | Blends of chlorobutyl rubber (CIIR) with two grades of ethylene-propylene diene monomer rubber (EPDM) were prepared and the effect of blend ratio on the cure characteristics, hot air ageing resistance, steam ageing resistance, and mechanical properties were evaluated. The blend of CIIR with EPDM grade 301 T showed additive behavior and the blend with the other grade of EPDM (NDR 4640) showed synergistic behavior. |
URI: | http://dyuthi.cusat.ac.in/purl/815 |
Files | Size |
---|---|
Sunil Jose and Rani Joseph,2008.PDF | (8.594Mb) |
Abstract: | Unsaturated polyester resins (UPRs) are used widely in the fiber-reinforced plastics (FRPs) industry. These resins have the disadvantages of brittleness and poor resistance to crack propagation. In this study, hybrid polymer networks (HPNs) based on UPR and epoxidized phenolic novolacs (EPNs) were prepared by reactive blending. A HPN is composed of a backbone polymer containing two types of reactive groups that can take part in crosslinking reactions via different mechanisms. EPNs were prepared by glycidylation of novolacs using epichlorohydrin. The novolacs had varying phenol: formaldehyde ratios. Blends of unsaturated polyester with EPN were then prepared. The physical properties of the cured blends were compared with those of the control resin. EPN shows good miscibility and compatibility with the resin and improves the toughness and impact resistance substantially. Considerable enhancement of tensile strength is also noticed at about 5% by weight of epoxidized novolac resin. TGA, DMA, and DSC were used to study the thermal properties of the toughened resin and the fracture behavior was studied using SEM. The blends are also found to have better thermal stability. Blending with EPN can be a useful and cost-effective technique for modification of UPR |
Description: | Journal of Applied Polymer Science, Vol. 100, 457–465 (2006) |
URI: | http://dyuthi.cusat.ac.in/purl/4690 |
Files | Size |
---|---|
Epoxidized Phen ... urated Polyester Resin.pdf | (237.1Kb) |
Abstract: | Hybrid polymer networks (HPNs) based on unsaturated polyester resin (UPR) and epoxy resins were synthesized by reactive blending. The epoxy resins used were epoxidised phenolic novolac (EPN), epoxidised cresol novolac (ECN) and diglycidyl ether of bisphenol A (DGEBA). Epoxy novolacs were prepared by glycidylation of the novolacs using epichlorohydrin. The physical, mechanical, and thermal properties of the cured blends were compared with those of the control resin. Epoxy resins show good miscibility and compatibility with the UPR resin on blending and the co-cured resin showed substantial improvement in the toughness and impact resistance. Considerable enhancement of tensile strength and toughness are noticed at very low loading of EPN. Thermogravimetric analysis (TGA), dynamic mechanical analysis (DMA) and diVerential scanning calorimetry (DSC) were employed to study the thermal properties of the toughened resin. The EPN/ UPR blends showed substantial improvement in thermal stability as evident from TGA and damping data. The fracture behaviour was corroborated by scanning electron microscopy (SEM). The performance of EPN is found to be superior to other epoxy resins |
Description: | European Polymer Journal 43 (2007) 1460–1469 |
URI: | http://dyuthi.cusat.ac.in/purl/4687 |
Files | Size |
---|---|
Epoxy-modiWed, ... yester hybrid networks.pdf | (714.5Kb) |
Abstract: | This thesis is a study of -Equality of Opportunity in Public Employment : Judicial Perspectives on Backwardness. This study is an attempt to evaluate the concept of backwardness and equality of opportunity in employment and to assess the judicial perspectives in relation to them. The study reveals that the recent review petition of the Constitution Bench did not assess the decision of Chakradhar and its import. The study reveals that the Indian judiciary could successfully locate and apply the above principles. It was-Justice Subba Rao's nascent attempt in Devadasan which marked the starting point of such a jurisprudential enquiry. Later Thomas developed the thoughts by a reading new meaning and content to equality provisions of the Constitution which included the elimination of inequalities as the positive content of Articles 14 and 16(1) and elevated reservation provision to the same status of equality principles under the Constitution. Soshit, Vasanth Kumar and Mandal supplemented further to the jurisprudential contents. In this process, the courts were guided by the theories of John Rawls, David Miller, Ronald Dworkin, Max Weber and Roscoe Pound. Thus there was a slow and steady process of transformation of the reservation provision. From an anti-meritarian, unenforceable and enabling provision, it reached a stage of equally relevant and explanatory part of fundamental right to equality. Mandal viewed it as a part of sharing of State power. Though this can be seen by rereading and re-joining thoughts of judges in this regard, the judicial approach lacks coherence and concerted efforts in evolving a jurisprudential basis for protective discrimination. The deliberations of the framers of the Constitution reveals that there was much confusion and indeterminacy with regard to the concept of Backwardness. The study shows that the judiciary has been keeping intact the framers’ expectation of having a reasonable quantum of reservation, preventing the undeserved sections from enjoying the benefit, avoiding its abuse and evolving a new criteria and rejecting the old ones. |
Description: | School of Legal Studies, Cochin University of Science and Technology |
URI: | http://dyuthi.cusat.ac.in/purl/3250 |
Files | Size |
---|---|
Dyuthi-T1224.pdf | (10.09Mb) |
Abstract: | Given a graph G and a set X ⊆ V(G), the relative Wiener index of X in G is defined as WX (G) = {u,v}∈X 2 dG(u, v) . The graphs G (of even order) in which for every partition V(G) = V1 +V2 of the vertex set V(G) such that |V1| = |V2| we haveWV1 (G) = WV2 (G) are called equal opportunity graphs. In this note we prove that a graph G of even order is an equal opportunity graph if and only if it is a distance-balanced graph. The latter graphs are known by several characteristic properties, for instance, they are precisely the graphs G in which all vertices u ∈ V(G) have the same total distance DG(u) = v∈V(G) dG(u, v). Some related problems are posed along the way, and the so-called Wiener game is introduced. |
Description: | Discrete Optimization 12 (2014) 150–154 |
URI: | http://dyuthi.cusat.ac.in/purl/4220 |
Files | Size |
---|---|
Equal opportuni ... raphs, and Wiener game.pdf | (367.3Kb) |
Abstract: | In this paper equienergetic self-complementary graphs on p vertices for every p = 4k; k ¸ 2 and p = 24t + 1; t ¸ 3 are constructed |
URI: | http://dyuthi.cusat.ac.in/purl/642 |
Files | Size |
---|---|
Equienergetic S ... entary Graphs for chek.pdf | (133.6Kb) |
Abstract: | Electronic resources have become a vital part of an academic library especially in universities and higher education institutions. The availability of electronic resources and the acceptance of the fonnat among the academics are rising day by day. As far as engineering students are concerned, they are much techno-savy and are more used to electronic resources. So it has become necessary for the libraries of engineering institutions to subscribe and provide access to electronic resources to satisfy its user community. Many studies have identified that academics are much preferring online journals and databases than their print counter-parts |
URI: | http://dyuthi.cusat.ac.in/purl/3927 |
Files | Size |
---|---|
E-Resources in ... collection development.pdf | (284.0Kb) |
Abstract: | Embedded systems are usually designed for a single or a specified set of tasks. This specificity means the system design as well as its hardware/software development can be highly optimized. Embedded software must meet the requirements such as high reliability operation on resource-constrained platforms, real time constraints and rapid development. This necessitates the adoption of static machine codes analysis tools running on a host machine for the validation and optimization of embedded system codes, which can help meet all of these goals. This could significantly augment the software quality and is still a challenging field.Embedded systems are usually designed for a single or a specified set of tasks. This specificity means the system design as well as its hardware/software development can be highly optimized. Embedded software must meet the requirements such as high reliability operation on resource-constrained platforms, real time constraints and rapid development. This necessitates the adoption of static machine codes analysis tools running on a host machine for the validation and optimization of embedded system codes, which can help meet all of these goals. This could significantly augment the software quality and is still a challenging field.Embedded systems are usually designed for a single or a specified set of tasks. This specificity means the system design as well as its hardware/software development can be highly optimized. Embedded software must meet the requirements such as high reliability operation on resource-constrained platforms, real time constraints and rapid development. This necessitates the adoption of static machine codes analysis tools running on a host machine for the validation and optimization of embedded system codes, which can help meet all of these goals. This could significantly augment the software quality and is still a challenging field.Embedded systems are usually designed for a single or a specified set of tasks. This specificity means the system design as well as its hardware/software development can be highly optimized. Embedded software must meet the requirements such as high reliability operation on resource-constrained platforms, real time constraints and rapid development. This necessitates the adoption of static machine codes analysis tools running on a host machine for the validation and optimization of embedded system codes, which can help meet all of these goals. This could significantly augment the software quality and is still a challenging field.This dissertation contributes to an architecture oriented code validation, error localization and optimization technique assisting the embedded system designer in software debugging, to make it more effective at early detection of software bugs that are otherwise hard to detect, using the static analysis of machine codes. The focus of this work is to develop methods that automatically localize faults as well as optimize the code and thus improve the debugging process as well as quality of the code.Validation is done with the help of rules of inferences formulated for the target processor. The rules govern the occurrence of illegitimate/out of place instructions and code sequences for executing the computational and integrated peripheral functions. The stipulated rules are encoded in propositional logic formulae and their compliance is tested individually in all possible execution paths of the application programs. An incorrect sequence of machine code pattern is identified using slicing techniques on the control flow graph generated from the machine code.An algorithm to assist the compiler to eliminate the redundant bank switching codes and decide on optimum data allocation to banked memory resulting in minimum number of bank switching codes in embedded system software is proposed. A relation matrix and a state transition diagram formed for the active memory bank state transition corresponding to each bank selection instruction is used for the detection of redundant codes. Instances of code redundancy based on the stipulated rules for the target processor are identified.This validation and optimization tool can be integrated to the system development environment. It is a novel approach independent of compiler/assembler, applicable to a wide range of processors once appropriate rules are formulated. Program states are identified mainly with machine code pattern, which drastically reduces the state space creation contributing to an improved state-of-the-art model checking. Though the technique described is general, the implementation is architecture oriented, and hence the feasibility study is conducted on PIC16F87X microcontrollers. The proposed tool will be very useful in steering novices towards correct use of difficult microcontroller features in developing embedded systems. |
Description: | Department of Computer Science, Cochin University of Science and Technology |
URI: | http://dyuthi.cusat.ac.in/purl/2996 |
Files | Size |
---|---|
Dyuthi-T0976.pdf | (3.390Mb) |
URI: | http://dyuthi.cusat.ac.in/purl/5331 |
Files | Size |
---|---|
Dyuthi T-2367.pdf | (6.495Mb) |
Abstract: | A continuous cell line (SISK) from kidney of sea bass, Lates calcarifer, has been established and characterized. The cell line was maintained in Leibovitz' L-15 supplemented with 15% fetal bovine serum. This cell line has been subcultured more than 100 times over a period of 2 years. The SISK cell line consists of predominantly of epithelial-like cells. These cells showed strong positive for epithelial markers such as cytokeratin 19 and pancytokeratin. The cells were able to grow at temperature between 25 and 32 °C with optimum temperature of 28 °C. The growth rate of sea bass kidney cells increased as the FBS proportion increased from 2% to 20% at 28 °C with optimum growth at the concentrations of 15% or 20% FBS. The distribution of chromosome number was 30 to 56 with a modal peak at 48 chromosomes. Polymerase chain reaction products were obtained from SISK cells and tissues of sea bass with primer sets of microsatellite markers of sea bass. Five fish viruses were tested on this cell line to determine its susceptibility to these viruses and this was found to be susceptible to MABV NC1 and nodavirus, and the infection was confirmed by RT-PCR and CPE. This suggests that the SISK cell line has good potential for the isolation of various fish viruses. This cell line has been shown to be susceptible to bacterial extracellular products. The SISK cell line is the India's first marine fish cell line. |
Description: | Aquaculture 257 (2006) 92–103 |
URI: | http://dyuthi.cusat.ac.in/purl/4025 |
Files | Size |
---|---|
Establishment a ... ass (Lates calcarifer).pdf | (1.207Mb) |
Abstract: | Development of continuous shrimp cell lines for effective investigation on shrimp viruses remains elusive with an arduous history of over 25 years. Despite presenting challenges to researchers in developing a cell line, the billion dollar aquaculture industry is under viral threat. Advances in molecular biology and various gene transfer technologies for immortalization of cells have resulted in the development of hundreds of cell lines from insects and mammals, but yet not a single cell line has been developed from shrimp and other marine invertebrates. Though improved growth and longevity of shrimp cells in vitro could be achieved by using modified growth media this did not make any leap to spontaneous transformation; probably due to the fact that shrimp cells inhibited neoplastic transformations. Oncogenic induction and immortalization are considered as the possible ways, and an exclusive medium for shrimp cell culture and an appropriate mode of transformation are crucial. In this review status of shrimp cell line development and its future orientation are discussed |
Description: | Indian J. Virol. (July–September 2012) 23(2):244–251 DOI 10.1007/s13337-012-0089-9 |
URI: | http://dyuthi.cusat.ac.in/purl/4056 |
Files | Size |
---|---|
Establishment o ... eption and Orientation.pdf | (265.6Kb) |
Abstract: | This paper proposes different estimators for the parameters of SemiPareto and Pareto autoregressive minification processes The asymptotic properties of the estimators are established by showing that the SemiPareto process is α-mixing. Asymptotic variances of different moment and maximum likelihood estimators are compared. |
URI: | http://dyuthi.cusat.ac.in/xmlui/purl/2107 |
Files | Size |
---|---|
ESTIMATION FOR THE SEMIPARETO PROCESSES.pdf | (587.3Kb) |
URI: | http://dyuthi.cusat.ac.in/purl/5528 |
Files | Size |
---|---|
Dyuthi T-2571.pdf | (17.78Mb) |
Abstract: | Urbanization refers to the process in which an increasing proportion of a population lives in cities and suburbs. Urbanization fuels the alteration of the Land use/Land cover pattern of the region including increase in built-up area, leading to imperviousness of the ground surface. With increasing urbanization and population pressures; the impervious areas in the cities are increasing fast. An impervious surface refers to an anthropogenic ally modified surface that prevents water from infiltrating into the soil. Surface imperviousness mapping is important for the studies related to water cycling, water quality, soil erosion, flood water drainage, non-point source pollution, urban heat island effect and urban hydrology. The present study estimates the Total Impervious Area (TIA) of the city of Kochi using high resolution satellite image (LISS IV, 5m. resolution). Additionally the study maps the Effective Impervious Area (EIA) by coupling the capabilities of GIS and Remote Sensing. Land use/Land cover map of the study area was prepared from the LISS IV image acquired for the year 2012. The classes were merged to prepare a map showing pervious and impervious area. Supervised Maximum Likelihood Classification (Supervised MLC),which is a simple but accurate method for image classification, is used in calculating TIA and an overall classification accuracy of 86.33% was obtained. Water bodies are 100% pervious, whereas urban built up area are 100% impervious. Further based on percentage of imperviousness, the Total Impervious Area is categorized into various classes |
Description: | Research Journal of Recent Sciences, Vol. 2(ISC-2012), 241-244 (2013) |
URI: | http://dyuthi.cusat.ac.in/purl/4647 |
Files | Size |
---|---|
Estimation of E ... using Satellite Images.pdf | (402.9Kb) |
Abstract: | Spent substrate, the residual material of mushroom cultivation, causes disposal problems for cultivators. Currently the spent substrate of different mushrooms is used mainly for composting. Edible mushrooms of Pleurotus sp. can grow on a wide range of lignocellulosic substrates. In the present study, Pleurotus eous was grown on paddy straw and the spent substrate was used for the production of ethanol. Lignocellulosic biomass cannot be saccharified by enzymes to high yield of ethanol without pretreatment. The root cause for the recalcitrance of lignocellulosic biomass such as paddy straw is the presence of lignin and hemicelluloses on the surface of cellulose. They form a barrier and prevent cellulase from accessing the cellulose in the substrate. In the untreated paddy straw, the amount of hemicelluloses and lignin (in % dry weight) were 20.30 and 20.34 respectively and the total reducing sugar was estimated to be 5.40 mg/g. Extracellular xylanase and ligninases of P. eous could reduce the amount of hemicelluloses and lignin to 16 and 11(% dry weight) respectively, by 21st day of cultivation. Growth of mushroom brought a seven fold increase in the total reducing sugar yield (39.20 mg/g) and six fold increase in the production of ethanol (6.48 g/L) after 48hrs of fermentation, when compared to untreated paddy straw |
Description: | International Journal of Applied Biology and Pharmaceutical Technology,vol 3,issue 1:jan-mar 2012 |
URI: | http://dyuthi.cusat.ac.in/purl/4730 |
Files | Size |
---|---|
Ethanol Product ... rate Of Pleurotus Eous.pdf | (273.3Kb) |
Abstract: | The towed array electronics is essentially a multichannel real time data acquisition system. The major challenges involved in it are the simultaneous acquisition of data from multiple channels, telemetry of the data over tow cable (several kilometres in some systems) and synchronization with the onboard receiver for accurate reconstruction. A serial protocol is best suited to transmit the data to onboard electronics since number of wires inside the tow cable is limited. The best transmission medium for data over large distances is the optical fibre. In this a two step approach towards the realization of a reliable telemetry scheme for the sensor data using standard protocols is described. The two schemes are discussed in this paper. The first scheme is for conversion of parallel, time-multiplexed multi-sensor data to Ethernet. Existing towed arrays can be upgraded to ethernet using this scheme. Here the last lap of the transmission is by Ethernet over Fibre. For the next generation of towed arrays it is required to digitize and convert the data to ethernet close to the sensor. This is the second scheme. At the heart of this design is the Analog-to-Ethernet node. In addition to a more reliable interface, this helps in easier fault detection and firmware updates in the field for the towed arrays. The design challenges and considerations for incorporating a network of embedded devices within the array are highlighted |
Description: | Ocean Electronics (SYMPOL), 2009 International Symposium on |
URI: | http://dyuthi.cusat.ac.in/purl/4495 |
Files | Size |
---|---|
Ethernet Telemetry for Towed Arrays.pdf | (798.5Kb) |
Abstract: | In the present study, an attempt has been made to prepare composites by incorporating expanded graphite fillers in insulating elastomer matrices and to study its DC electrical conductivity, dielectric properties and electromagnetic shielding characteristics, in addition to evaluating the mechanical properties. Recently, electronic devices and components have been rapidly developing and advancing. Thus, with increased usage of electronic devices, electromagnetic waves generated by electronic systems can potentially create serious problems such as malfunctions of medical apparatus and industry robots and can even cause harm to the human body. Therefore, in this work the applicable utility of the prepared composites as electromagnetic interference (EMI) shielding material are also investigated. The dissertation includes nine chapters |
Description: | Department of Polymer Science and Rubber Technology,Cochin University Of Science And Technology |
URI: | http://dyuthi.cusat.ac.in/purl/3416 |
Files | Size |
---|---|
Dyuthi T1410.pdf | (7.205Mb) |
Dyuthi Digital Repository Copyright © 2007-2011 Cochin University of Science and Technology. Items in Dyuthi are protected by copyright, with all rights reserved, unless otherwise indicated.