Abstract: | Alkylation of phenol with methanol has been carried out over Sn-La and Sn-Sm mixed oxides of varying compositions at 623 K in a vapour phase flow reactor. It is found that the product selectivity is greatly influenced by the acid-base properties of the catalysts. Ortho-cresol formation is favoured over catalysts with weak acid sites whereas formation of 2,6-xylenol occurs in the presence of stronger acid sites. The cyclohexanol decomposition reaction and titrimetric method using Hammett indicators have been employed to elucidate the acid-base properties of the catalysts. |
Description: | Indian Journal of Chemistry Vol. 38A, December 1999, pp. 1253-1255 |
URI: | http://dyuthi.cusat.ac.in/purl/2147 |
Files | Size |
---|---|
Dyuthi-P0005.pdf | (224.0Kb) |
URI: | http://dyuthi.cusat.ac.in/purl/5243 |
Files | Size |
---|---|
Dyuthi T-2279.pdf | (5.318Mb) |
Abstract: | Almost self-centered graphs were recently introduced as the graphs with exactly two non-central vertices. In this paper we characterize almost selfcentered graphs among median graphs and among chordal graphs. In the first case P4 and the graphs obtained from hypercubes by attaching to them a single leaf are the only such graphs. Among chordal graph the variety of almost self-centered graph is much richer, despite the fact that their diameter is at most 3. We also discuss almost self-centered graphs among partial cubes and among k-chordal graphs, classes of graphs that generalize median and chordal graphs, respectively. Characterizations of almost self-centered graphs among these two classes seem elusive |
Description: | TAIWANESE JOURNAL OF MATHEMATICS Vol. 16, No. 5, pp. 1911-1922, October 2012 |
URI: | http://dyuthi.cusat.ac.in/purl/4213 |
Files | Size |
---|---|
Almost Self-Centered Median And Chordal Graphs.pdf | (225.6Kb) |
Abstract: | The brain stems (13S) of streptozotocin (STZ)-diabetic rats were studied lo see the changes in neurotransmitter content and their receptor regulation. The norepinephrine (NE) content determined in the diabetic brain stems did ^ control. an E showed la while PI turnover hri content increased significantly compared N^r eNveFa o the recep significant increase. The alpha2 adrenergic receptor IneP utisoulinntreat d ratsetheNE contentt dec^ sled was significantly reduced during diabetes. in versedcto reanorm sed ulcrea e tK reatment the state. while EPI content remained increased as in die diabetic B,, for a]pha2 adrenergic receptors slw^nificantly while Unlabelled clonidine inhibited [31-I]NE binding in BS of control, diabetic and insulin treated ulations bindi diabetic rats showed that alpha2 adrenergicre^ punks cojnidiabetic animal the ligand bound sites with Hill slopes significantly away from unity. weaker to the low affinity site than in controls. Insulin treatment reversed[ this allumbmn to control levels. The displacement analysis using (-)-epinephrine age in control and diabetic animals revealed two populations of receptor affinidtyo=tat ss. In control animals, when GTP analogue added with epinephrine, the curve nagnlde caofnfitnroit yS model; but in the diabetic BS this effect `not aobserved. In bintact oth the diabetic data thus showlthat the effects of monovalent cations on affinity alphaz adrenergic receptors have a reduced affinity v due in stem ialtered Itscppeomson(5- regulation. The serotonin (5-HT) coat hydroxy) tryptophan (5-HTP) showed an increase and its breakdown metabolite (5-hydroxy) indoleacetic acid (5-I{IAA) showed a significant decrease. This showed that in serotonergic which l nerves there is a disturbance in both synthetic and breankduomwnbers pretma'med ana increased 5-HT. The high affinity serotonin receptor um ese serotonerg decrease in the receptor affinity. The insulin ^treatmentsturtiy showsha decreased serotonergic receptor kinetic parameters to control level. receptor function. These changes in adrenergic and serotonergic receptor function were suggested to be important in insulin function during STZ diabetes. |
URI: | http://dyuthi.cusat.ac.in/purl/583 |
Files | Size |
---|---|
Pius and C S P (1999)april 2.PDF | (8.614Mb) |
Abstract: | Moderate pyridoxine deficiency in adult male Sprague-Dawley rats results in significant hypertension, associated with a general sympathetic stimulation , including an increase in the turnover of norepinephrine in the heart. Treatment of these rats with pyridoxine reversed blood pressure to normal within 24 h. Treatment of pyridoxine-deficient rats with clonidine or x-methyl dihydroxyphenylalanine (x-methyl DOPA) also reduced the blood pressure of these animals to normal . There was also a significant increase in the Bma, of high and low affinity [3H]p-amino-clonidine binding to crude synaptosomal membrane preparations of the brain stem of deficient rats indicating chronic underexposure of)(, adrenoreceptors to endogenous norepinephrin. |
URI: | http://dyuthi.cusat.ac.in/purl/592 |
Files | Size |
---|---|
M Viswanathan and others(1989)nov.27PDF.PDF | (3.599Mb) |
Abstract: | Muscarinic M1 and M3 receptor changes in the brain stem during pancreatic regeneration were investigated. Brain stem acetylcholine esterase activity decreased at the time of regeneration . Sympathetic activity also decreased as indicated by the norepinephrine (NE) and epinephrine (EPI) content of adrenals and also in the plasma. Muscarinic Ml and M3 receptors showed reciprocal changes in the brain stem during regeneration. Muscairnic M1 receptor number decreased at time of regeneration without any change in the affinity. High affinity M3 receptors showed an increase in the number. The affinity did not show any change . The number of low affinity receptors decreased with decreased Kd at 72 hours after partial pancreatectomy. The Kd reversed to control value with a reversal of the number of receptors to near control value . Gene expression studies also showed a similar change in the mRNA level of Ml and M3 receptors . These alterations in the muscarinic receptors regulate sympathetic activity and maintain glucose level during pancreatic regeneration. Central muscarinic M1 and M3 receptor subtypes functional balance is suggested to regulate sympathetic and parasympathetic activity, which in turn control the islet cell proliferation and glucose homeostasis. |
URI: | http://dyuthi.cusat.ac.in/purl/574 |
Files | Size |
---|---|
T R Renuka and others(2004)march.PDF | (8.838Mb) |
Abstract: | Modern computer systems are plagued with stability and security problems: applications lose data, web servers are hacked, and systems crash under heavy load. Many of these problems or anomalies arise from rare program behavior caused by attacks or errors. A substantial percentage of the web-based attacks are due to buffer overflows. Many methods have been devised to detect and prevent anomalous situations that arise from buffer overflows. The current state-of-art of anomaly detection systems is relatively primitive and mainly depend on static code checking to take care of buffer overflow attacks. For protection, Stack Guards and I-leap Guards are also used in wide varieties.This dissertation proposes an anomaly detection system, based on frequencies of system calls in the system call trace. System call traces represented as frequency sequences are profiled using sequence sets. A sequence set is identified by the starting sequence and frequencies of specific system calls. The deviations of the current input sequence from the corresponding normal profile in the frequency pattern of system calls is computed and expressed as an anomaly score. A simple Bayesian model is used for an accurate detection.Experimental results are reported which show that frequency of system calls represented using sequence sets, captures the normal behavior of programs under normal conditions of usage. This captured behavior allows the system to detect anomalies with a low rate of false positives. Data are presented which show that Bayesian Network on frequency variations responds effectively to induced buffer overflows. It can also help administrators to detect deviations in program flow introduced due to errors. |
Description: | Department of Computer Science, Cochin University of Science and Technology. |
URI: | http://dyuthi.cusat.ac.in/purl/2929 |
Files | Size |
---|---|
Dyuthi-T0920.pdf | (2.681Mb) |
URI: | http://dyuthi.cusat.ac.in/purl/5459 |
Files | Size |
---|---|
Dyuthi T-2498.pdf | (461.3Kb) |
URI: | http://dyuthi.cusat.ac.in/purl/5407 |
Files | Size |
---|---|
Chapter-1.pdf | (540.7Kb) |
Chapter-2.pdf | (544.7Kb) |
Chapter-3.pdf | (528.2Kb) |
Chapter-4.pdf | (502.3Kb) |
Chapter-5.pdf | (497.0Kb) |
Chapter-6.pdf | (467.9Kb) |
Contents.pdf | (610.5Kb) |
Upasamhar.pdf | (427.6Kb) |
Abstract: | Earlier studies5773 in our laboratory showed that when a nucleophile is used along with disulphide or sulphenamide accelerators the vulcanization is accelerated greatly and the reaction mechanism is generally nucleophilic in nature. However it was observed that it also changes with the systems under review. The present study, deals with the use of unsubstituted amidino thiourea i.e. aminoimino methyl thiourea(AMT) V in the vulcanization studies of different elastorners and their blends. One of the aims of this study was to get further proof with regard to the theory of nucleophilic reaction mechanism in such binary systems.Mixes containing thiourea are used as controls. AMT is more nucleophilic than TU and this is clear from the fact that the fonner can condense with isothiocynate even in the absence of alkali while TU cannot". Also the guanidinyl group in AMT can facilitate the polarization of the C=S bond favouring a nucleophilic reaction |
Description: | Department Of Polymer Science And Rubber Technology Cochin University Of Science And Technology |
URI: | http://dyuthi.cusat.ac.in/purl/4700 |
Files | Size |
---|---|
Dyuthi-T1831.pdf | (2.103Mb) |
Abstract: | This work mainly concentrate to understand the optical and electrical properties of amorphous zinc tin oxide and amorphous zinc indium tin oxide thin films for TFT applications. Amorphous materials are promising in achieving better device performance on temperature sensitive substrates compared to polycrystalline materials. Most of these amorphous oxides are multicomponent and as such there exists the need for an optimized chemical composition. For this we have to make individual targets with required chemical composition to use it in conventional thin film deposition techniques like PLD and sputtering. Instead, if we use separate targets for each of the cationic element and if separately control the power during the simultaneous sputtering process, then we can change the chemical composition by simply adjusting the sputtering power. This is what is done in co-sputtering technique. Eventhough there had some reports about thin film deposition using this technique, there was no reports about the use of this technique in TFT fabrication until very recent time. Hence in this work, co-sputtering has performed as a major technique for thin film deposition and TFT fabrication. PLD were also performed as it is a relatively new technique and allows the use high oxygen pressure during deposition. This helps to control the carrier density in the channel and also favours the smooth film surface. Both these properties are crucial in TFT.Zinc tin oxide material is interesting in the sense that it does not contain costly indium. Eventhough some works were already reported in ZTO based TFTs, there was no systematic study about ZTO thin film's various optoelectronic properties from a TFT manufacturing perspective. Attempts have made to analyse the ZTO films prepared by PLD and co-sputtering. As more type of cations present in the film, chances are high to form an amorphous phase. Zinc indium tin oxide is studied as a multicomponent oxide material suitable for TFT fabrication. |
Description: | Department of Physics, Cochin University of Science and Technology |
URI: | http://dyuthi.cusat.ac.in/purl/2519 |
Files | Size |
---|---|
Dyuthi-T0678.pdf | (10.18Mb) |
Abstract: | In the present work, we describe our efforts to develop device quality CuInSe2, films through low cost, simple and eco-friendly hybrid techniques. The most important point to be highlighted here is that the method fully avoids the use of poisonous gases such as H2Se/Se vapour. Instead, selenisation is achieved through solid state reaction between amorphous selenium and polycrystalline metal layers resulting in both binary and ternary selenides. Thin films of amorphous selenium (a-Se) used for this is deposited using Chemical Bath Deposition (CBD). CulnSe2 films are prepared through the selenisation process. Another PV material, indium selenide (In2Se3) thin films are also prepared using this process. |
Description: | Department of Physics, Cochin University of Science and Technology |
URI: | http://dyuthi.cusat.ac.in/purl/2912 |
Files | Size |
---|---|
Dyuthi-T0903.pdf | (15.36Mb) |
Abstract: | Hindi |
Description: | Department of Hindi,Cochin University of Science and Technology |
URI: | http://dyuthi.cusat.ac.in/purl/4772 |
Files | Size |
---|---|
Dyuthi-T1869.pdf | (3.747Mb) |
Abstract: | HINDI |
Description: | Department of Hindi Cochin University of Science & Technology |
URI: | http://dyuthi.cusat.ac.in/purl/4752 |
Files | Size |
---|---|
Dyuthi-T1849.pdf | (13.58Mb) |
Description: | Faculty of Engineering. Cochin University of Science and Technology |
URI: | http://dyuthi.cusat.ac.in/purl/2358 |
Files | Size |
---|---|
Dyuthi-T0630.pdf | (3.053Mb) |
Abstract: | This is a sequel to our earlier work on the modulated logistic map. Here, we first show that the map comes under the universality class of Feigenbaum. We then give evidence for the fact that our model can generate strange attractors in the unit square for an uncountable number of parameter values in the range μ∞<μ<1. Numerical plots of the attractor for several values of μ are given and the self-similar structure is explicity shown in one case. The fractal and information dimensions of the attractors for many values of μ are shown to be greater than one and the variation in their structure is analysed using the two Lyapunov exponents of the system. Our results suggest that the map can be considered as an analogue of the logistic map in two dimensions and may be useful in describing certain higher dimensional chaotic phenomena. |
URI: | http://dyuthi.cusat.ac.in/purl/2567 |
Files | Size |
---|---|
Dyuthi-P0126.pdf | (484.3Kb) |
Abstract: | A dual-port dual-polarized compact microstrip antenna for avoiding cross coupling between the two frequency bands is proposed and analyzed. This antenna offers channel isolation better than 25 dB, and is more compact compared to a conventional rectangular patch. Analytical equations for calculating the resonant frequencies at both ports are also presented. The theoretical calculations are verified using experimental results |
URI: | http://dyuthi.cusat.ac.in/purl/1393 |
Files | Size |
---|---|
Analysis and de ... act microstrip antenna.PDF | (1.268Mb) |
Abstract: | Most adaptive linearization circuits for the nonlinear amplifier have a feedback loop that returns the output signal oj'tne eunplifier to the lineurizer. The loop delay of the linearizer most be controlled precisely so that the convergence of the linearizer should be assured lot this Letter a delay control circuit is presented. It is a delay lock loop (ULL) with it modified early-lute gate and can he easily applied to a DSP implementation. The proposed DLL circuit is applied to an adaptive linearizer with the use of a polynomial predistorter, and the simulalion for a 16-QAM signal is performed. The simulation results show that the proposed DLL eliminates the delay between the reference input signal and the delayed feedback signal of the linearizing circuit perfectly, so that the predistorter polynomial coefficients converge into the optimum value and a high degree of linearization is achieved |
URI: | http://dyuthi.cusat.ac.in/purl/1386 |
Files | Size |
---|---|
Analysis and de ... h loop delay estimator.PDF | (549.4Kb) |
URI: | http://dyuthi.cusat.ac.in/purl/5190 |
Files | Size |
---|---|
Dyuthi T-2225.pdf | (22.25Mb) |
Abstract: | To ensure quality of machined products at minimum machining costs and maximum machining effectiveness, it is very important to select optimum parameters when metal cutting machine tools are employed. Traditionally, the experience of the operator plays a major role in the selection of optimum metal cutting conditions. However, attaining optimum values each time by even a skilled operator is difficult. The non-linear nature of the machining process has compelled engineers to search for more effective methods to attain optimization. The design objective preceding most engineering design activities is simply to minimize the cost of production or to maximize the production efficiency. The main aim of research work reported here is to build robust optimization algorithms by exploiting ideas that nature has to offer from its backyard and using it to solve real world optimization problems in manufacturing processes.In this thesis, after conducting an exhaustive literature review, several optimization techniques used in various manufacturing processes have been identified. The selection of optimal cutting parameters, like depth of cut, feed and speed is a very important issue for every machining process. Experiments have been designed using Taguchi technique and dry turning of SS420 has been performed on Kirlosker turn master 35 lathe. Analysis using S/N and ANOVA were performed to find the optimum level and percentage of contribution of each parameter. By using S/N analysis the optimum machining parameters from the experimentation is obtained.Optimization algorithms begin with one or more design solutions supplied by the user and then iteratively check new design solutions, relative search spaces in order to achieve the true optimum solution. A mathematical model has been developed using response surface analysis for surface roughness and the model was validated using published results from literature.Methodologies in optimization such as Simulated annealing (SA), Particle Swarm Optimization (PSO), Conventional Genetic Algorithm (CGA) and Improved Genetic Algorithm (IGA) are applied to optimize machining parameters while dry turning of SS420 material. All the above algorithms were tested for their efficiency, robustness and accuracy and observe how they often outperform conventional optimization method applied to difficult real world problems. The SA, PSO, CGA and IGA codes were developed using MATLAB. For each evolutionary algorithmic method, optimum cutting conditions are provided to achieve better surface finish.The computational results using SA clearly demonstrated that the proposed solution procedure is quite capable in solving such complicated problems effectively and efficiently. Particle Swarm Optimization (PSO) is a relatively recent heuristic search method whose mechanics are inspired by the swarming or collaborative behavior of biological populations. From the results it has been observed that PSO provides better results and also more computationally efficient.Based on the results obtained using CGA and IGA for the optimization of machining process, the proposed IGA provides better results than the conventional GA. The improved genetic algorithm incorporating a stochastic crossover technique and an artificial initial population scheme is developed to provide a faster search mechanism. Finally, a comparison among these algorithms were made for the specific example of dry turning of SS 420 material and arriving at optimum machining parameters of feed, cutting speed, depth of cut and tool nose radius for minimum surface roughness as the criterion. To summarize, the research work fills in conspicuous gaps between research prototypes and industry requirements, by simulating evolutionary procedures seen in nature that optimize its own systems. |
Description: | Division of Mechanical Engineering,Cochin University of Science and Technology |
URI: | http://dyuthi.cusat.ac.in/purl/2768 |
Files | Size |
---|---|
Dyuthi-T0791.pdf | (1.548Mb) |
Dyuthi Digital Repository Copyright © 2007-2011 Cochin University of Science and Technology. Items in Dyuthi are protected by copyright, with all rights reserved, unless otherwise indicated.